Bluetooth® Wireless - Motorola DROID DROID 3 User Manual

Bluetooth® wireless
lose the wires and go wireless
Quick start: Bluetooth wireless
Settings
Find it: Menu >
Bluetooth settings
>
Bluetooth settings
Bluetooth
Device name
Motorola Phone
Discoverable
Make device discoverable
Scan for devices
Bluetooth devices
Motorola Headset
Pair with this device
Turn Bluetooth power on or off
Settings
Find it: Menu >
Bluetooth
>
Wireless & networks
>
Touch to turn on
& off & to scan.
Touch to re-scan.
Touch to connect.
Wireless & networks
>
Note: To extend battery life, turn Bluetooth power
off when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings
2 Touch Menu >
Bluetooth settings
>
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(like ) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
Wireless & networks
>
.
Scan for devices
.
, or enter the device passkey
Bluetooth® wireless 39