Changing the programme sequence
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been
successfully started. This prevents the
machine being operated unintentionally,
e.g. by children.
If the washer-dryer is switched off
during active programme operation,
the standby function does not switch
the washer-dryer off completely after
15 minutes. Safety functions continue
to be active because there may still be
water inside the drum.
Cancelling a programme
You can cancel a programme at any
time after it has started.
Turn the programme selector to the
position.
The programme is interrupted.
Then turn the programme selector to
any position.
Rotating bars ... ... appear
on the time display.
- During washing:
The washer-dryer pumps the suds away
and the wash programme is cancelled.
The door lock is released.
- During drying:
The washer-dryer cools the laundry
down before the door can be opened.
Removing the laundry
Wait until the symbol in the display
goes out and the door is unlocked.
50
Pull the door open and unload the
laundry.
Selecting another programme
Close the door.
Select the programme you want to
use.
Add detergent to the detergent
drawer, if necessary.
Touch the Start/Add laundry sensor.
The programme will start.