Advertisement
FUNCTIONS
1. POWER INPUT TERMINAL (12V)
To be connected to the positive terminal of your vehicle battery or other constant+ 12V
source.
2. GROUND INPUT TERMINAL
To be wired to the vehicle's chassis ground.
3. REMOTE TURN-ON INPUT TERMINAL (REMOTE)
To be connected to the remote control wire or antenna lead of the source unit for remote
ON/OFF.
4. POWER INDICATOR
T his indicator lights up when the internal switching power supply is activated and the unit is
operational.
5. LEFT /RIGHT FRONT CHANNEL SIGNAL INPUTS
To be connected to the front channel output of the source unit.
6. DUAL INPUT SWITCH
"IN" : When the parallel input is at the "IN" position, the input signals coming in through the
front channel signal inputs are split and directed to the front and rear channels
simultaneously. (This feature is to be engaged where the source unit has no separate
front, rear or subwoofer channel outputs.)
"OUT": If the source unit has independent front and rear channel outputs, disengage the
parallel input by sliding the switch to the "OUT" positiion.
7. LEFT/RIGHT REAR CHANNEL SIGNAL INPUTS
To be connected to the rear channel outputs of the source unit. BUT MAKE SURE THAT THE
DUAL INPUT SWITCH IS AT THE "OUT" POSITION.
8. LEFT /RIGHT DUAL IN/OUT TERMINALS
As Input Terminal: To be connected to the subwoofer output of the source unit.
As output Terminal: To be connected to the front channel input terminal of another electronic
9. FRONT CHANNEL HIGH-PASS FREQUENCY SELECTOR
For selection of front channel high-pass crossover frequency between 3 2 Hz and 800 Hz (or
3 20 Hz and SK Hz when its frequency multiplier is at "x10" position).
10. REAR CHANNEL HIGH-PASS FREQUENCY SELECTOR
For selection of rear channel high-pass crossover frequency between 32 Hz and 800 Hz.
crossover in a multi-crossover system.
2
Advertisement
