Table of Contents
Advertisement
1. Self Check is used to automatically check the bus lines and
hexadecimal code of the TV set.
2. To get into the Self Check mode, press the down n [-/
on the customer controls at the front of the set, at the same time
pressing the HELP button on the remote control and the screen
will show:
4. SERVICE MODE FUNCTION
MPU controls the functions switching for each IIC through IIC bus in this chassis. The following
setting and adjustment can be adjusted by remote control in Service Mode.
4.1. HOW TO ENTER SERVICE 1
1. In sound menu, set BASS to MAX and set TREBLE to MINIMUM.
2. Simultaneously press INDEX button on remote control and
VOLUME DOWN button [ - ] on the TV set.
4.2. HOW TO ENTER SERVICE 2
1. Set the channel to CH99.
2. Press HOLD button on remote control. / Note: / To exit Service
mode, press N or Power button on remote control.
] button
Advertisement
Table of Contents
