Abit mGuru User Manual page 16

ABIT µGuru
4
The "FanEQ" intelligently and automatically adjusts CPU fan speed according to system load
and temperature. It lowers fan speed when CPU and Chipset temperature is decreased due to
lighter system load, ensuring a quiet computing environment. Accompanied with the almost
noiseless environment is the eager for more power saving, performance increasing, and easing
off CPU loading.
12
[DDR Voltage]: Change the DIMM slot voltage. Point your
mouse to the triangle mark and click to pull down the voltage
table. Choose adequate figure.
[NB Voltage]: Change the working voltage of NB (North
Bridge) chipset. Point your mouse to the triangle mark and
click to pull down the voltage table. Choose adequate figure.
[SB Voltage]: Change the working voltage of SB (South
Bridge) chipset. Point your mouse to the triangle mark and
click to pull down the voltage table. Choose adequate figure.
[HT Voltage]: Change the working voltage of Hyper
Transport. Point your mouse to the triangle mark and click to
pull down the voltage table. Choose adequate figure.
[Load Default]: Click this button to load the factory default
settings.
•
CPU Fan/NB Fan/SYS Fan
These items intelligently and automatically adjust the fan
speed according to system loading and temperature.
[Enable Fan EQ]: Check this box to enable the function of
4
FAN EQ so as to control the fan speed automatically by
different state of configuration.