Mitsubishi Electric LT-46244 Owner's Manual page 59

Setting Up NetCommand Control of
an A/V Receiver, continued
• To erase the IR code just "learned," press CANCEL
while the name is highlighted.
to highlight the name Input1. You can
5. Press
enter a custom name using the letters/numbers on
the remote control. It is best to assign names to
"learned" inputs that match the input names dis-
played on the A/V receiver. For this example, enter
the custom name TV using these guidelines:
• To select a character, repeatedly press a
number key on the remote control to cycle
through the characters associated with the key.
Special characters are available with the 1 key (!,
&, blank space) and 0 key (/, * ,-).
• Press ENTER to set the character and move the
highlight to the next character.
• To delete a character, highlight the character
and press CANCEL.
• To highlight the first character, repeatedly press
CANCEL.
6. Press to move the highlight to the Assign
column.
to highlight AudioOut (TV audio output).
7. Use
The triangular marker is always next to the assigned
sound source.
8. Press EXIT if finished or continue with setup for
another TV source.
Completed NetCommand setup described for
controlling A/V receiver switching to the A/V receiver's
audio input labelled "TV."
Setup 2: Automatic A/V Receiver Switching for a
Surround Sound Device
Use this setup to send digital surround sound directly
from a device to an A/V receiver.
1. Under Learn/Name, navigate to highlight the area
next to Input2.
In this example, the IR code for the A/V receiver's
DVD Audio input will be "learned" as Input 2.
2. Press ENTER on the TV's remote control.
6. NetCommand
IMPORTANT
All audio from what you are watching on the TV
is always available as a stereo or mono output
on both the TV's AVR AUDIO OUTPUT and
DIGITAL AUDIO OUT jacks.
To use the digital surround sound capabilities
of your A/V receiver however, you must connect
your DVD player, satellite receiver, or cable box
directly to the A/V receiver, as surround sound
may not be available from the TV's audio output.
Setup 2: A/V receiver audio from a device providing
surround sound directly to the A/V receiver
Completed NetCommand setup described for
controlling A/V receiver switching to an A/V receiver
input labelled "DVD."
3. While the text Input2 is flashing, press and hold the
DVD INPUT key on the A/V receiver's remote control.
4. When a check appears next to Input 2, release the
DVD INPUT key.
• If the text stops flashing before the check mark
appears, repeat this step.
• To erase the IR code just "learned," press CANCEL
while the name is highlighted.
5. Press to highlight the name Input2. Assign a
custom name that matches the input name dis-
played on the A/V receiver. For this example, enter
the custom name DVD using the number keys and
the guidelines given earlier.
6. Press to move the highlight to the second Assign
column.
7. Use to highlight DVD in the list of devices
recognized by the TV. The triangular marker always
indicates the assigned sound source.
8. Press EXIT if finished or continue for additional TV
sources.
59