First-Time Power-On; Setting Up And Using Tv Inputs; Using The Ant (Antenna) Input; Memorizing Channels With Channel Scan - Mitsubishi Electric Unisen LT-40164 Basic Owner's Manual

First-Time Power-On

1.
TV
Press the key to
ensure that the remote
control is in TV mode.
2.
Aim the emitter (bulb)
end of the remote control
at the TV and press the
POWER key
. Wait for the
Welcome screen.
3.
If you wish to change the
menu language to Español,
press .
4.
Press to move to the
energy-mode selections.
Select Home.
5.
Press to highlight EXIT.
Press ENTER to clear the
menu.

Setting Up and Using TV Inputs

Using the ANT (Antenna) Input

If using an antenna or direct cable service (no cable
box), connect the incoming coaxial cable to the TV's
ANT input. Refer to page 16.
You must perform a channel scan to enable recep-
tion of digital channels. If you skip this step, the TV
will receive only analog channels. The channel scan
will search for high-definition and standard-definition
channels available in the local area.

Memorizing Channels with Channel Scan

For the ANT input
To start channel memorization
1.
Power on the TV.
2.
Press MENU and open the Setup > Channel menu.
First press to navigate to the Setup icon, then
use to highlight the Channel icon.
1. Basic Setup and Operation
TV
TV
Welcome Screen Energy Options
• Mitsubishi recommends the
which uses power within ENERGY STAR ®
guidelines.
• The Retail setting looks best under bright
lighting. In this mode, the TV uses power in
excess of ENERGY STAR guidelines.
This table compares energy choices offered in the
Welcome screen.
Home
Picture Mode Bright
Backlight Level Reduced
Brightness
Start channel memorization from the Setup > Channel
menu.
3.
Press to enter the menu.
4.
Highlight Ant Air if connected to an
over-the-air antenna. Highlight Ant
Cable for service over direct cable
(no cable box). Press ENTER to add a
check.
5.
For first-time setup, highlight
channels. To scan for channels not
already in memory, highlight New
only. Press ENTER to add a check.
6.
Scan and press ENTER.
Highlight
Channel memorization may take up
to 15 minutes to complete.
To stop channel memorization before completion,
press CANCEL.
For assistance call 1(800) 332-2119
9
Home setting,
Retail
Brilliant
Full Brightness
All