Controls - Kenwood C-V150 Service Manual

RDS indicators
(RDS, TP, TA, EON, PTY, NEWS, INFO.)
MEMORY indicator
RDS INFO. MEMO
FM
EON NEWS
TP TA
PTY
MW
TIMER 1 2
LW
TIMER Broadcast band indi-
indicators cators
1 2 3
VOICE
ACTIVATE
ON/STANDBY
PHONES
INPUT
% ^
The keys which have the same names as the controls on the
remote control unit provide the same functions as them.
1
(ON/STANDBY) key
Press to switch between ON and STAND-
BY.
2 VOICE ACTIVATE indicator
Lights to indicate an occurrence of voice
activation.
3 Remote sensor
4 TIMER SET key
Press to set the timer function.
5 CLOCK key
Press to set the clock.
6 VOICE ACTIVATE ON/OFF key
Press to switch the voice-activation opera-
tion ON and OFF.
7 VOICE ACTIVATE SET 1 key
Press to record words for use in voice ac-
tivation.
8 VOICE ACTIVATE SET 2 key
Press to record words for use in voice ac-
tivation.
9 STEREO key
0 DSP key
! DOLBY key
STANDBY mode indication
While standby mode is indicated, a small amount of power is supplied to the system to back up the memory. In this mode, the system can be
turned ON by remote control.
With this unit, standby mode is indicated by means of the display panel. The system is in standby mode while the clock display is shown.

CONTROLS

Frequency display, input
selector display, preset
channel display, surround
mode display
4 5 6 7
VOICE
TIMER ACTIVATE
SET CLOCK ON/OFF SET 1
TIMER RDS
MODE S.DIRECT DISPLAY PTY TA/NEWS/INFO.
TAPE 2
(MONITOR)
&* ( ) ¡ ™
@ MODE key
Press to switch various setting modes.
# MULTI.CONTROL key
Press to select various setting modes.
$ GRC transmitter
Outputs the signals transmitted to the
Graphical Remote Control.
% PHONES jack
For use in headphones listening.
^ INPUT SELECTOR key
Press to select the input.
& TAPE 2 (MONITOR) key
For use in monitoring of recording, etc.
* TIMER MODE key
Press to switch the timer modes.
( S.DIRECT key
Press to switch the Source Direct function
which allows to reproduce the source with
a better quality.
) RDS DISPLAY key
Press to switch the RDS display.
¡RDS PTY key
For use during reception of RDS broad-
casting.
C-V100/V150/V300/V350
Decibel indicator
Delay time indicator
dB
ms
kHz
MHz
DSP indicator
Receiving frequency
unit indicators
Display
8 9 0 ! @ #
MULTI.CONTROL
MODE
SET 2
STEREO DSP LEVEL
PTY SELECT
A.MEMO AUTO BAND TUNING
AV CONTROL CERTER KC-2
£ ¢ ∞ §
AUTO tuning
PRO LOGIC mode/AUTO stereo
indicator reception indicator
TAPE 2 indicator STEREO indicator
PRO LOGIC TAPE 2 AUTO
3 STEREO SOURCE STEREO
DIRECT
DSP TUNED
SLEEP MUTE
SLEEP
TUNED indicator
TIMER
indicator
MUTE indicator
3 STEREO SOURCE DIRECT indicator
indicator
$
VOLUME CONTROL
OPEN/CLOSE
DOWN UP
¶
™RDS TA/NEWS/INFO. key
For use during reception of RDS broad-
casting.
£A.MEMO key
Press when using the auto memory func-
tion.
¢AUTO key
Press to select the tuning mode.
The auto tuning or manual tuning mode
can be selected.
The input selection display of a source
can be switched to another by pressing
and holding the AUTO key for more than
2 seconds.
∞BAND key
Press to switch the broadcasting band.
§TUNING keys (∧, ∨)
Press to select the radio station to be re-
ceived.
These keys are also used in the clock ad-
justment and timer operations.
¶OPEN/CLOSE key
•VOLUME CONTROL knob
•
3