Changing Basic Settings - Bosch SMS6ZDI48E User Manual

en Basic settings
Basic setting
Start programme
Tone volume
Button volume
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Press ⁠ .
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows H:xx.
a The display shows
38
Display text Selection
1
SP:01 SP:00 - SP:01
1
SL:02 SL:00 -SL:03
1
bL:02 bL:00 - bL:03
1
Cn:00 Cn:00 - Cn:01
1
rc:01 rc:00 - rc:02
rE: Start with
Y:ES
Confirm with
⁠ .
Description
Set a default programme for when
the appliance is switched on.
¡ With the setting "SP:00", the last
programme selected is set by de-
fault when the appliance is
switched on.
¡ With the setting "SP:01", the Eco
50° programme is set by default
when the appliance is switched
on.
Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Activate or deactivate
→ "Remote Start ", Page 40.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 40
¡ With the setting "rc:02", the func-
tion is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Press
3.
the display shows the required set-
ting.
Press or
4.
display shows the right value.
You can change several settings.
repeatedly until
repeatedly until the