Specifications; General Power Tool Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita XGT GDT02 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Fastening capacities
No load speed (RPM)
Impacts per minute
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Machine screw
Standard bolt
High tensile bolt
4 (Max impact mode)
3 (Hard impact mode)
2 (Medium impact mode)
1 (Soft impact mode)
T mode
4 (Max impact mode)
3 (Hard impact mode)
2 (Medium impact mode)
1 (Soft impact mode)
T mode
M4 - M8 (5/32" - 5/16")
M5 - M16 (3/16" - 5/8")
M5 - M14 (3/16" - 9/16")
D.C. 36 V - 40 V max
1.7 - 2.9 kg (3.7 - 6.4 lbs)
BL4020* / BL4025* / BL4040* / BL4050F / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2 ENGLISH
GDT02
0 - 3,700 /min
0 - 3,200 /min
0 - 2,100 /min
0 - 1,100 /min
0 - 2,400 /min
0 - 4,100 /min
0 - 3,600 /min
0 - 2,600 /min
0 - 1,400 /min
-
121 mm (4-3/4")