Formatting the card (initialization)
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up
necessary data in advance.
→
[Setup] → [Format]
[LVF] button (Recording pictures using the viewfinder)
1
Press [LVF] button
Automatic switching between
viewfinder and monitor
●
For automatic switching between the viewfinder and monitor, the eye sensor
automatically switches the display to viewfinder when your eye or an object
moves close to the viewfinder.
●
When you open the monitor, the display automatically switches to monitor
display, and the [LVF] button and eye sensor are disabled.
Adjusting the angle of the monitor
• Be careful not to catch your finger, etc. in the
monitor.
• When rotating the angle of the monitor, be careful
not to apply too much force. Doing so may cause
damage or malfunction. (Open and close with your
finger on point
• When not using this camera, close the monitor
completely back to the original position.
.)
Viewfinder display
DVQX2305 (ENG)
Preparations/Basics
Monitor display
21