Technics SA-C600S Owner's Manual page 93

Firmware updates
"F/W Update"
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are available
free of charge.
• For the update information, refer to the following
website.
www.technics.com/support/firmware/
Downloading takes approx. 15 minutes.
Do not disconnect the AC power supply cord
or turn this unit to standby while updating.
Do not disconnect the USB flash memory
while updating.
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
Note
• Due to measure to solve security issues, etc., there
are times when operations (timers, etc.) on this
system are forcibly stopped and the firmware is
updated. If you do not want the firmware forcibly
updated, disconnect the LAN cable or disconnect
from the wireless network.
• During the update process, no other operations
can be performed.
• If there are no updates, "Firmware is Up To Date"
is displayed. (No need to update it.)
• Updating the firmware may reset the settings of
this unit.
Update via Internet
■
Preparation
• Connect this unit to the network. (⇒ 26)
 Make sure that the network is connected to the
Internet.
1 Press [SETUP].
2 Press [ ], [ ] repeatedly to select "F/W
Update" and then press [OK].
3 Press [ ], [ ] to select "Internet" and
then press [OK].
4 Press [ ], [ ] to select "Yes" and then
press [OK].
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
• When the update has finished successfully,
"Success" is displayed.
5 Press [ ] to turn this unit off and on.
93
%"
%"
(Continued)