Panasonic DP-UB9000EGK Operating Instructions Manual page 24

Playing back contents on the
Network Contents server
You can share photos, videos and music stored in
the Network Contents server*
recorders, etc.] connected to your home network.
≥ About support format of Network Contents
( 45)
Player
≥ When this unit is connected to a Panasonic
recorder with a server function, register this unit
to the recorder.
1
Press [HOME].
2
Select "Home Network" and press [OK].
3
Select "Network Contents Playback" and
press [OK].
≥ The list can be updated by pressing the
green button on the remote control.
≥ The selected equipment can be deleted
from the list by pressing the red button on
the remote control.
≥ The connection method can be switched to
Direct Access*
2
button on the remote control.
4
Select the equipment and press [OK].
5
Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
To exit from Network Contents Playback
screen
Press [HOME].
[PC, smartphone,
1
Server
by pressing the yellow
Playback
Using the Digital Media
Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from Network Contents server*
(this unit).
Possible applications:
Renderer
Renderer
1
Press [HOME].
2
Select "Home Network" and press [OK].
3
Select "Media Renderer" and press [OK].
4
Select "Home Network" or "Direct
Access"* and press [OK], then follow the
2
indications on the screen.
5
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
≥ Direct Access* connection while using Home Network
2
feature is only temporary, and the network connection
method returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.
DLNA compatible server, etc.
*1
Direct Access is a function which allows you to wirelessly
*2
and directly connect wireless LAN-equipped devices to
each other without a wireless router in between. You can
connect devices such as those that support Wi-Fi Direct
DMC compatible software should be installed.
*3
- 24 -
on the Renderer
1
*3
Server
*3
Controller
*3
Server
i
Controller
.
®