Table of Contents
Advertisement
Picture
Mode - User
Picture
Brightness
Color
Contrast
Black Boost
Audio
Gaming
Low Blue Light
OSD
ACM
System
HDR
LightSense
Super Sharpness
Move
Enter
Mode - User
Picture
Max Brightness
Color
Audio
Gaming
OSD
System
Save Settings to...
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to to the function you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales or choose function.
4.
The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low
Blue Light, ACM, HDR, LightSense.Super Sharpness.
5.
Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
6.
Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7.
Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8.
Low Blue Light: The display uses the low blue light panel. It complies with TÜV
Rheinland Low Blue Light Hardware Solution certification under factory reset/default
setting (Low Blue Light=Standard, Brightness: 70%, Contrast: 50%, CCT: 6500K).
9.
ACM: Turn ACM on or off.
-----------------------------------------------------------------------------------------------------------
Note: Set to "On", will be based on the current screen to dynamic contrast adjustment.
24
70
50
5
Standard
Off
Off
X
Off
Off
Off
X
Advertisement
Table of Contents
