Advertisement
Quick Links
(2)
During play, press REW
previous track.
(3)
LCD screen will display " Er " if the unit
can not read CD track data.
(4)
When CD track data has been read, LCD SCREEN
will display the last track number with the total
(3)
During pause mode, press FF
play time.
button to play the next track (or previous track).
MOVE TO THE DESIRED SPOT
(5)
Unit will start play from track No.1 automatically.
(1)
During play, press and hold FF
continuously to fast forward (or fast reverse) the current
STOP
track.
(1)
Press POWER OFF (
)button to stop play , LCD
REPEAT PLAY
screen will display the last track number.
(1)
Press MODE button once to repeat one track.
PAUSE
(1)
Press POWER ON button to pause on/off alternately,
TIMER will flash.
(2)
Press MODE button twice to repeat all tracks.
INTRO PLAY
(1)
Press MODE button three times during play
and "INTRO"will flash.
LISTEN TO DESIRED TRACK
(1)
Press FF
(or REW
) button to set the desired
Press POWER ON(
track#, press POWER ON (
)button to play. Press
(2)
FF
(or REW
) button to change the track# during
INTRO play from track No.1
the play mode.
Press FF button
(3)
Press FF
button to start INTRO
play from next tracks in random order.
SLIM PERSONAL CD PLAYER
AM/FM STEREO RADIO AND 45 SEC ANTI-SHOCK
CX-CD487
Instruction Manual
button to play
(4)
Press REW
button to start INTROplay from
current or previous track.
RANDOM PLAY
Press REW button
(1)
Press MODE button four times at STOP mode
and "RANDOM" is displayed and flash.
(or RAW
)
(2)
Press POWER ON(
) button to play tracks
in random order.
(or REW
) button
Or
(1)
Select RANDOM mode during play and
"RANDOM" will flash.
(2)
Press POWER ON(
) button to play
tracks in random order.
(3)
To cancel RANDOM mode, press MODE or
POWER OFF(
) button.
PROGRAM PLAY
(1)
TO PROGRAM
(a)
Press PROG. button at stop mode and
"PROG" and "00" will display.
(b)
Press FF
(or REW
) button to select
) button to start
the track number.
(c)
When desired track is displayed, press PROG.
button to set.
(d)
Repeat (b)~(c) to set up to 24 tracks. The display will show the
current set track.
(e)
Set tracks can be checked by pressing PROG. button.
NAME OF PARTS
INTRODUCTION
Please read and follow the instruction manual
carefully before operating in order to avoid any
damages to the unit. Any adjustment or repair
should be done by a qualified service center only
to receive warranty.
BATTERY OPERATION
(BATTERIES NOT INCLUDED)
Your unit operates on two(2) AA size alkaline batteries.
DOOR OPEN switch
Open the CD cover and insert the batteries in the battery
compartment following the polarity diagram located
inside.
LCD Display
RE-CHARGEABLE BATTERY OPERATION
MODE button
(RE-CHARGEABLE BATTERIES NOT INCLUDED)
PLAY/POWER ON
ESP/BAND button
botton
You can operate this unit with two "AA" rechargeable
PROGRAM button
batteries. For new or exhausted rechargeable batteries,
STOP/POWER OFF
we recommend that (Refer to battery manufacturer's
Hold switch(on
button
rear)
guide)
When operating the unit with AC adapter
TUNING/REW
DC jack
and non-rechargeable batteries in the
Headphone jack
compartment, please make sure to set the
Volume Control
"Charge" switch to "Off" position to avoid
CD/RADIO switch
damaging the unit.
PRESETS
TUNING/FF
1. Open the CD cover and insert the batteries (2x"AA") in
the battery compartment following the polarity diagram
DBBS switch
located inside.
BOTH BATTERIES MUST BE RECHARGEABLE NiCd
TYPES. OTHER BATTERIES MAY EXPLODE OR LEAK.
(2)
TO COMPLETE THE PROGRAMMING AND TO PLAY
Press POWER ON(
) button to start the
programmed tracks.
(3)
TO CLEAR THE PROGRAMMING, Press POWER
Press and hold TUNING/FF(
) or TUNING/REW(
about one second for fast setting.Fast setting rate: 8 steps per
OFF(
) button.
second.
ANTI-SKIP PLAY
Once fast setting is proceeding onwards, release the key for auto
tuning.
Press ESP/BAND button to prevent disruption or
Auto tuning stops when Station Detection signal is received.
stopping of CD player. LCD will display
When the tuning reaches the band edge, it wraps around to the
opposite end, and continues seeking onwards.
at anti-skip mode.
During auto tuning process, memory recalling or writing is not allowed.
Auto tuning can be stopped at once upon pressing TUNING/FF(
TUNING/REW(
) button.
Memory Recall
(1)"
"is displayed when the battery voltage
Press PRESET button.
reaches low.
Memory number will be shown.
Memory number remains on each time when memory is recalled.
They will be blanked immediately when TUNING/FF or TUNING/REW
(2)When the voltage is too low, the unit will
button is pressed to alter the existing frequency.
automatically turn off.
Memory Writing
RADIO MODE
Press PROG. key once to initiate memory writing process. Memory
set indicator "PROG " appears and flashes.
Press PRESET key once to enter the display frequency to the
desired memory, and press memory key again thus terminate the
Slide RADIO/CD switch to RADIO position, press power on button
writing process,Memory set indicator "PRESET" is shown frozen.
to turn the radio power on.
During the writing process. if no further valid key pressing is detected,
the microprocessor will terminate the writing process after 5 seconds
LCD screen will display band
idling.The memory set indicator and memory number will be blanked.
and receiving frequency.
If always adjusting the desired frequency prior to memory writing
Band Selection
process. It should be noted that once TUNING/FF or TUNING/REW
key is pressed, the memory writing process will be terminated and the
Press BAND button once to toggle the band
memory number will be blanked.
control from FM to AM.
Other functions:
Stereo indicator: stereo indicator lights up on receiving FM stereo
signal from RF band.
Manual/Auto Tuning
Last AM and FM frequency and memory can be preserved if the time
Press TUNING/FF(
) or TUNING/REW(
) button to increase
of replacing the batteries and converting to CD mode not more than
or decrease the existing frequency by one step.
30 seconds.
Upon reaching the band edge, it wraps around to the opposite
end.
2. Plug in AC adapter and slide the "CHARGE SWITCH"
to "ON" position to start charging.(AC adapter not included)
3. Unplug the AC adapter after charging.
DO NOT CHARGE THE BATTERIES MORE THAN 24
HOURS OR MORE THAN RECOMMENDED TIME.
OVERCHARGING MAY DETERIORATE THE PERFORM-
ANCE OF THE RECHARGEABLE BATTERIES.
4. If the operating time decrease drastically after the
batteries have been recharged properly, purchase new
rechargeable NiCd batteries.
Do not attempt to recharge alkaline batteries. This may
cause leakage and damage to the unit.
Do not mix alkaline batteries with rechargeable batteries.
MONEY SAVING TIPS.
Due to the nature of CD technology, the unit uses power
even when the unit is off. To extend the batteries' life, use
the adapter for indoor operation or where power is
supplied. Use the battery operation only when the unit is in
mobile.
DBBS FUNCTION
The Dynamic Bass Boost System(DBBS) enhances the
low frequency(Bass) response of the output. Set the
SPECIFICATION
) button for
COBY ELECTRONICS CORP.("COBY") warrants this product to the
original purchaser to be free from defects in material or workmanship
CD Play Section
under normal use for 90 DAYS from the date of original purchase.
COBY agrees under this warranty, to repair or replace it with a new or
Frequency Response..............................20 ~ 20,000Hz
reconditioned product at no additional charge. Our warranty does not
Wow and Flutter......................................Below Measurable Limits
cover any product which has been subjected to neglect, unreasonable
Sampling Rate.........................................8 times over sampling
use, accident, violation of operating instruction or any product that has
D/A Converter..........................................1-Bit
been repaired or modified by an unauthorized service agent. To obtain
factory service, return this unit freight-prepaid to the address shown
RADIO Section
) or
below within the duration of this warranty. Enclose $6.00 for each item
FM.............................................................87.5- 108 MHz
in the form of money order made payable to COBY ELECTRONICS
CORP. to cover the cost of shipping and handing. Also, include a copy
AM.............................................................530 - 1720 kHz
of the sales receipt to show proof of purchase and a detailed description
of the problem. The unit(s) must be packaged in such a way as to rea-
General
sonably protect it from possible shipping damage. For further information
write to.
Maximum Output (Stereo Headphone)....20mW+20mW(32ohm)
Power Supply
AC Adapter.......................................110V 60Hz (not included)
DC......................................................4.5V with DC Adapter
COBY'S liability under any legal theory for any loss damage in any way
(AC adapter not included)
related to this product shall not exceed the sales price of this product.
(Batteries not Included)
In no event shall COBY be liable for any incidental or consequential
damages resulting from the use of this product, or inability to use this
product. Repair or replacement as provided under this warranty is the
................................
Dimension
5.1"x 1.1"x 5.6"(WHD)
exclusive right of the consumer.
.................................
Weight
0.66lbs (Main Unit Only)
Accessories Included ............ Professional High Performance
Except for the extent prohibited by law, no express or implied warranty
Digital Neck Band Headphones
of merchant ability or fitness for a particular purpose on this product
shall be extended beyond the period of this warranty. Some States
prohibit the exclusion or limitation of incidental or consequential
damages, so that the above limitation or exclusion may not apply
to you. This warranty gives you specific rights, and you may also
have other rights which may vary from State to State.
Volume to low listening level and press DBBS switch in
Insert the disc into the unit with the label of the disc
the direction of the arrow to turn this function ON.
facing up.
Gently wipe the disc using a soft cloth from the center
Note: Some CD's with DBBS may exceed the bass
to the outer direction to remove dust, fingerprints or any
response capacity and can cause distortion. Do not play
other particles on the disc surface. Never use
DBBS in high volume. Playing DBBS in high volume may
chemicals, such as record sprays, anti-static sprays,
cause damage to the headphone and more importantly to
benzene or thinners to clean the CD. These chemicals
your hearing.
can damage the disc surface permanently.
To avoid serious scratches on CD, keep them in the
HOLD FUNCTION
cases after each use. Scratches can cause the laser
This HOLD function prevents any unwanted function
pick-up skip in the future play.
changes during PLAY or STOP mode. Slide HOLD switch
Do not place stickers or write anything on the disc.
to the arrow direction (or opposite) to turn the function
ON (OFF). No other function buttons operate on HOLD
mode, except DBBS function.(except radio function)
CAUTION
Hearing experts advise against the constant use of
personal stereo played at high volume. Constant high
Read the instruction manual before operating this unit.
volume use can lead to hearing loss. If you experience
Do not expose the unit to high temperature or humidity.
ringing in the ears or hearing loss, discontinue use and
Use dampened soft cloth to clean the unit. Do not use
seek medical advice.
strong detergent or solvent to clean the unit.
Ensure that all electrical connections(including the main
plug, extension leads and interconnections between
pieces of equipment) are properly made and in
accordance with the manufacture's instructions.
To remove the disc from its storage case, press down on
Consult your dealer if you are ever in doubt about the
the center of the case and lift the disc out. Hold it carefully
installation, operation or safety of your equipment.
90 DAYS LIMITED WARRANTY
COBY ELECTRONICS CORP.
Customer Service Dept.
56-65 Rust Street
Maspeth, N.Y. 11378
IMPORTANT
The CD mechanism and the sensitive circuitry may
cause interference to a radio tuner nearby. Do not
operate this unit while operating other radio devices.
Danger This product utilizes invisible laser
radiation. Avoid direct exposure
to the beam.
Caution Use of controls, adjustments or procedures
not listed in this manual may result in
.
hazardous radiation exposure
CONCERNING COMPACT DISCS
Only compact discs identified with this
mark can be used with this player.
CD MODE
POWER ON
AUTO PLAY
(1)
Slide the CD/RADIO switch to CD position.
Press POWER ON
button to turn the power on.
LCD screen will display :
(2)
LCD screen will display " NO DISC", if CD is not in the
unit.
Advertisement
