Hardware Installation; Connecting Your Video Source - Miglia TVMini Plus Hardware Manual

I. Hardware Installation
Connect TVMini+ to a USB 2.0 port of your computer. The stick is thin enough to be used on the left USB 2.0 port
of a MacBook Pro, without covering the Magsafe port.
II. Connecting your video source
1. Coaxial connection
If you receive TV channels via a roof-mounted antenna, an analogue cable service or a portableantenna, you
will most likely want to use the TV input on TVMini+.
Connect your coaxial cable as shown on the illustration below
TVMini+™ User Guide
Page 5