Advertisement
Quick Links
Product Dimensions
Decorator Wall Hood
DA251
Location Codes
E -
110 Volt - 15 Amp 3-wire power
supply connects through top or rear of
chimney.
O -
Standard 110 Volt Outlet
Notes
• All installations must be done in
accordance with local codes.
• 6" duct connects to blower system inside
chimney.
E
O
Front Perspective
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010405
Advertisement
Related Manuals for Miele DA251
Summary of Contents for Miele DA251
- Page 1 Product Dimensions Decorator Wall Hood DA251 Location Codes 110 Volt - 15 Amp 3-wire power supply connects through top or rear of chimney. Standard 110 Volt Outlet Notes • All installations must be done in accordance with local codes. • 6" duct connects to blower system inside chimney.
- Page 2 Installation Dimensions Decorator Wall Hoods DA251 Structural member Notes • Center unit over cooking surface • Distance "S" is determined by the cooking surface. Minimum distance "S" is: - 18" for electric surfaces - 26" for gas surfaces • Area behind mounting plates MUST be reinforced using a minimum of 1/2"...