Download Print this page

Zebra GS Series Manual

Disk skimmer

Advertisement

Quick Links

Zebra Skimmers Corp.
Zebra Skimmers Corp.
Disk Skimmer Manual
The Zebra GS Series Disk Skimmer
automatically separates and removes tramp
oils which cause bacterial growth and
coolant destruction.
Since coolant is expensive to buy and
dispose of, the GS Series reduces your
costs associated with spent coolant.
Motor Specifi cations: Continuous-Duty
• 110v, 1 phase, 60Hz, .43 amps, rated at 10K hrs. MTBF
• 7 rpm, fan-cooled
• 3-wire ground cord
• Non drip-proof motor
• Under normal conditions, the unit needs to be operated just a few
hours per day
Warnings
• For lifting oil from machine sumps only
• Excessive oil fl ow will overfl ow the reservoir
• Do not immerse motor in any liquid
• Shield motor from spray
• Do not use in explosive atmosphere
• Per NEC regulations, a ground fault interrupt must be installed
Warranty
• Wipers and disks are warrantied for life. If they ever need replac-
ing, contact us for free ones. (Disk and wipers can also be pur-
chased as spares for other units)
• All other parts are warrantied for a period of one year
If you have any questions or require product support,
please contact 888-249-4855
888-249-4855 • www.ZebraSkimmers.com • Zebra Skimmers Corporation
Zebra™ GS Series
GS Series Disk Skimmer Manual
GS Series Disk Skimmer
Visit
www.CoolantMaintenance.com
for clean coolant tips
Copyright 2005 © ZSC
Zebra Skimmers Corp.
Chagrin Falls, OH 44022
888-249-4855
www.ZebraSkimmers.com
Printed in the USA • Revised April 2005
Information is correct as of the date printed.
We reserve the right to change any
information without notice.
PO Box 833
Page 1

Advertisement

loading

Summary of Contents for Zebra GS Series

  • Page 1 Since coolant is expensive to buy and dispose of, the GS Series reduces your costs associated with spent coolant. Motor Specifi cations: Continuous-Duty • 110v, 1 phase, 60Hz, .43 amps, rated at 10K hrs. MTBF •...
  • Page 2 Oil and coolant enter here. Oil fl oats on top of coolant to approximately 1” (22mm) thick. Oil exits here. Coolant sinks to the bottom, and passes under this weir. Clean coolant passes over this elbow and returns to the machine sump. Page 2 888-249-4855 • www.ZebraSkimmers.com • Zebra Skimmers Corporation...