Audi Q7 e-tron quattro 4M Training Manual page 25

Key power transmission components of the plug-in hybrid drive in
the Audi Q7 e-tron quattro are the 8-speed automatic gearbox
0D7, the prop shaft and the rear axle drive 0D2 together with the
internal combustion engine.
The eight-speed automatic gearbox 0D7 is a conventional 8-speed
automatic gearbox for quattro drive paired with the hybrid module.
The hybrid module is seated between the internal combustion
engine and the conventional automatic gearbox.
The core element of the hybird module is the e-machine, with a
peak power output of 94 kW and peak torque of 350 Nm.
The internal combustion engine and the e-machine can be coupled
by separation clutch K0 (refer to page 32).
The internal combustion engine and the gearbox are supported by a 5-point mounting system.
Refer to page 22 for more information.
Flexible absorber,
use depends on engine type
Prop shaft,
The prop shaft assembly procedure is identical to the standard procedure described in SSP 632 for
the Audi Q7 (type 4M). The prop shaft of the Audi Q7 e-tron quattro is, however, shorter due to the
size of the 0D7 gearbox.
Note
All work on the high-voltage system must be referred to a qualified high-voltage technician (refer to safety information in
Self Study Programme 650 "Audi Q7 e-tron quattro (type 4M) high-voltage system and vehicle electrics".
Both drives, in combination with the 3.0l V6 TDI engine, deliver a
total system output of 275 kW to the gearbox. Total output is
270 kW in combination with the third-generation 2.0l R4 TFSI
engine. Both versions of the internal combustion engine transmit a
maximum system torque of 700 Nm to the gearbox.
The prop shaft is a shortened version of the prop shaft used on the
Audi Q7 (type 4M); this same goes for the rear axle drive 0D2,
which is also used on the Audi Q7 (type 4M).
You can find detailled information about the prop shaft and the
rear axle drive in Self Study Programme 632 "Audi Q7 (type 4M)".
Rear axle drive 0D2: unlocked differential,
factory designation: HL 600 B
< Back Forward > Ξ Contents
649_058
25