Miele Touchtronic W1113 Operating And Installation Manual page 13

Special spin options
Hold
(only for the "Custom" program)
^ Select "Hold".
The laundry is not spun and remains
soaking in water. This will prevent
wrinkles if the laundry is not removed
immediately at the end of the wash
program.
To start the final spin
^ Select the desired spin speed.
^ Press the "Start / Stop" T button.
To finish the program
^ Press the "Door" button.
The water will be drained away.
^ Use the "Door" button to open the
door.
Using the washer
No spin
^ Select "No spin".
The laundry is not spun after the final
rinse, but the water is drained away.
After the drain cycle, the washer goes
immediately into the Anti-Crease cycle.
Spinning between these rinses is also
omitted in this setting. If "No Spin" is
selected in the programs "Sturdy" and
"Custom", an extra rinse cycle is
added.
13