Hitron EBBU Quick Installation Manual

QUICK INSTALLATION GUIDE
EBBU: External Battery Back-up
Reset
Tel
USB
Battery Back-up Unit Installation
0440010322N0
Unplug device
STEP Disconnect the power adapter from both the device and the
1
wall plug. IMPORTANT: Make sure the unit is not powered on
Ethernet
until Step 4.
Cable
The buzzer will sound when battery life is less than 50%.
Battery
Power
Install batteries into the EBBU
2
Pull up the notch to open the door. Remove the door and set it aside.
Install batteries into the EBBU
3
Slide the batteries into the compartments separately.
Read me
first!
1
2
1
2
3
4
pull up
Parts
Mute button (silence the buzzer)
Install batteries into the EBBU
STEP
1
2
Loosen the two screws on the EBBU and set them aside.
Please do not throw the screws away.
4
Slide the door in, ensuring the latches align with the holes inside
the EBBU casing. Push the bottom corners of the door to ensure
the notch latches properly in place to keep the door closed.
Align
Power port
Battery port
DC output port
Screws