Osd Operating - AOC M20S651B Service Manual

20" LCD TV Color Monitor
2.3 OSD Operations
1. Press the MENU button to display or close main menu.
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu or enable/disable the function.
4. Press the MENU button to exit the menu.
Main Menu
Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Picture Setup,
Sound setup, Function Setup and TV setup. When the input source is PC/AV1/AV2 (SCART)/S-VIDEO mode, only
the Sound Setup, Picture Setup and Function Setup can be selected; shown in the figure below:
When the input source is TV mode, the Sound Setup, Picture Setup, Channel select Setup, Function Setup and TV
Setup can be selected; shown in the figure below:
Sound Setup (Same as in PC, TV, AV1, S-Video and AV2(SCART))
1. The range of adjusting volume, bass and treble is from 0~100.
2. Select "ON" or "OFF" in sound selection to control the sound output.
3. Bass and Treble: the easy Equalizer function, Bass can adjust the low frequency sound and Treble can adjust
the high frequency sound.
4. The range of adjusting Balance is -50~+50; when adjusting from 0 to -50, the sound from the left track fades
until silence; when adjusting from 0 to +50, the sound from the right track fades until silence.
5. AVL: you can set it "ON" or "OFF".
The function is to adjust the input sound automatically. You may enable this function when you notice that the
sound in the two tracks are very different, in order to prevent the bad sound effect resulting from large sound
variation.
6. Select "ON" or "OFF" for Loudness: a default setting is preset, you may adjust when necessary.
The following menu will appear when selecting continuously:
8
AOC M20S651B