Acer XV240Y Manual page 11

S3
Assemble ASSY TRIM
PICTURE 1
LED BD
S4
Assemble SHD
PICTURE 1
S5
Assemble SPK
Insert the LED wire into the LED BD and assemble the LED BD into the TRIM as picture 1.
Assemble the ASSY TRIM on the MF.
Lock 2 screws to the ASSY TRIM as the picture 3.
Insert the LVDS into the Panel, locate the SHD on the Panel and insert the big connector of
the lamp wire to P/BD as picture 1.
Paste 1 mylar on SHD as picture 2.
Tear off the 4 gums on the LED wire, arrange the LED wire and insert the LED wire into the
I/F BD.
Assemble the SPK to the MF.
Insert the wire of SPK into the I/F BD.
Arrange the wire of SPK and stick 4 pieces of black tapes to fasten the wire of SPK on the
Panel.
Stick 1 piece of black tape to fasten the lamp wire
Insert the SPK Wire to
PCBA under the hole
Red line below
the SHD
The middle part of the SPK
Wire MUST NOT go above
the edge of SHD.
PICTURE 2
PICTURE 2
11
ACER XV240Y