Advertisement
Quick Links
X2-OPERATING MANUAL
V
ECTOR
WITH TOUCH SCREEN
Operating instructions Touch devices of
the X2 operating system
The X2 operating system was designed for universal controllers and sensors. Devices based on the X2
operating system contain a multitude of standardized functions and application possibilities. From simple
ventilation controllers for domestic applications to HVAC system solutions for entire buildings. There is a
suitable solution for almost every application. With the EasySet program, the controllers can be
conveniently read out, programmed and transferred to other controllers.
Applications
These operating instructions apply to devices of the X2-series devices using the OPT1 series touch panel HMIs. The FC
series is suitable for the Feller EDIZIOdue® frame.
Doc: 70-00-0741, Serie X2, 20190213
© Vector Controls GmbH, Schweiz
Page 1
subjects to alteration
www.vectorcontrols.com
Advertisement
Related Manuals for Vector OPT1-FC-HTNV-VC
Summary of Contents for Vector OPT1-FC-HTNV-VC
- Page 1 These operating instructions apply to devices of the X2-series devices using the OPT1 series touch panel HMIs. The FC series is suitable for the Feller EDIZIOdue® frame. Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 1 subjects to alteration...
- Page 2 In addition, the various product descriptions and the programming instructions for technicians are contained in separate documents. This should facilitate the work with the different controllers and operating levels. Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 2 subjects to alteration...
-
Page 3: Display And Operation
Energy hold OFF (EHO): All outputs switched off, inputs for alarms monitored Heating active Cooling active Fan active Manual override, delay for release function Schedule set Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 3 subjects to alteration www.vectorcontrols.com... -
Page 4: Idle Display
Copy error: Communication error with external memory AEC-PM1 or AEC-PM2. Err6: Copy error: Checksums of the data record are incorrect. The data record is invalid. Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 4 subjects to alteration www.vectorcontrols.com... - Page 5 When status is ON = in the display. Press the RIGHT button to change the status. 2.4. Press LEFT button (1x) for back to the submenu. Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 5 subjects to alteration www.vectorcontrols.com...
- Page 6 After pressing the RIGHT key, you have returned to point 3.2. Now you can start creating the Pr01 weekly schedules for programs 2 - 12. Appropriate times, weekdays as well as control loops or outputs can then be specified. Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 6 subjects to alteration www.vectorcontrols.com...
- Page 7 After pressing the RIGHT button, you have returned to point 3.2. Now you can start creating the weekly schedules for programs 2 - 12. Appropriate times, weekdays as well as control loops or outputs can then be specified. Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 7 subjects to alteration www.vectorcontrols.com...
- Page 8 Option 5: Auto operation: Heating and cooling change automatically as required. This must be set with function 3FU (heating and cooling Auto mode). Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 8 subjects to alteration www.vectorcontrols.com...
- Page 9 If the runtime is greater than 9999 hours, one bar appears on the right-hand side for every 10,000 hours. The example on the right corresponds to 50345 hours runtime. (Maximum term is 65535 hours = 7.5 years) Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 9 subjects to alteration www.vectorcontrols.com...
- Page 10 Quality - Innovation - Partnership Vector Controls GmbH Poststrasse 20, CH-8620 Wetzikon, Schweiz Tel: +41 41 740 60 50 Fax: +41 41 740 60 51 info@vectorcontrols.com www.vectorcontrols.com Doc: 70-00-0741, Serie X2, 20190213 © Vector Controls GmbH, Schweiz Page 10 subjects to alteration www.vectorcontrols.com...