Download Print this page

Shure CVB User Manual

Boundary condenser microphones

Advertisement

Quick Links

29.8.2020
Publications
CVB
Boundary Condenser Microphones
General Description
The Shure Centraverse CVB is a professional boundary electret condenser microphone
for use in desktop installed sound reinforcement applications. Available in cardioid and
omnidirectional polar patterns and black or white color options, its low-profile design
fits seamlessly within any design aesthetic.
Features
Superior Shure design and rugged, dependable construction
Available in cardioid or omnidirectional polar patterns
Attached 12 ft XLR cable
Mounting holes for secure installation
Commshield
wireless devices (smartphones, etc.)
Model Variations
CVB-B/C: Black, Cardioid
CVB-B/O: Black, Omnidirectional
CVB-W/C: White, Cardioid
CVB-W/O: White, Omnidirectional
Note: Model availability depends on region. See your local Shure dealer or distributor for
details.
Installation
1 Install two screws into the mounting surface exactly 24 mm (15/16 in ) apart
https://pubs.shure.com/guide/CVB/en-US
technology guards against unwanted RF interference from portable
®
CVB User Guide
1/8

Advertisement

loading

Summary of Contents for Shure CVB

  • Page 1 CVB-B/O: Black, Omnidirectional CVB-W/C: White, Cardioid CVB-W/O: White, Omnidirectional Note: Model availability depends on region. See your local Shure dealer or distributor for details. Installation 1 Install two screws into the mounting surface exactly 24 mm (15/16 in ) apart...
  • Page 2: Microphone Placement

    29.8.2020 CVB User Guide 1. Install two screws into the mounting surface, exactly 24 mm (15/16 in.) apart. Leave a 5 mm (3/16 in.) gap between the screw head and the mounting surface.  Publications Only use screws with a flat-bottom head.
  • Page 3: Specifications

    29.8.2020 CVB User Guide  Publications Specifications  Cartridge Type Electret Condenser Polar Pattern CVB/O Omnidirectional CVB/C Cardioid Frequency Response 70 Hz to 16,000 Hz Output Impedance 180 Ω Sensitivity open circuit voltage,at 1kHz,typical CVB/O -28 dBV/Pa(40 mV)[1] CVB/C -32.5 dBV/Pa(23 mV)[1] Maximum SPL[2] 1 kHz at 1% THD CVB/O 117 dBSPL...
  • Page 4 29.8.2020 CVB User Guide CVB/C  Publications 120 dBSPL Signal-to-Noise Ratio[3] Ref. 94 dB SPLat 1kHz CVB/O 74 dB CVB/C 67  dB Dynamic Range CVB/O 97 dB CVB/C 93  dB Self Noise equivalent SPL, A-weighted, typical CVB/O 20 dBSPL CVB/C 27 dBSPL Preamplifier Output Clipping Level...
  • Page 5 29.8.2020 CVB User Guide  Publications CVB/C –7 dBV Common Mode Rejection 10 Hz to 100 kHz >45  dB Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin Environmental Conditions Operating Temperature -18° to 57° C (0° to 135° F) Storage Temperature -29°...
  • Page 6 29.8.2020 CVB User Guide  Publications https://pubs.shure.com/guide/CVB/en-US...
  • Page 7 Meets essential requirements of all applicable European Directives. Eligible for CE marking. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance...
  • Page 8 29.8.2020 CVB User Guide Shure Europe GmbH  Publications Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: 49-7262-92 49 0 Fax: 49-7262-92 49 11 4 Email: info@shure.de https://pubs.shure.com/guide/CVB/en-US...

This manual is also suitable for:

Cvb-b/cCvb-b/oCvb-w/cCvb-w/o