Advertisement
WALL ANCHORING HARDWARE (ANTI-TIP)
Ltr.
Qty.
2
A
B
2
C
4
2
D
Installation:
1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit.
2. Corresponding to Stud location, attach one Bracket (C) to back of unit using Small Screw (B).
3. To keep hardware out of view after installation, attach remaining Bracket (C) INTO WALL STUD
with Large Screw (A) 2 inches below Bracket attached to back of unit.
4. Move unit into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
DO NOT use alcohol based products or spray polisher as
Hardware Included
Large Screw
Small Screw
Bracket
Retention Belt
(B)
(D)
(C)
(A)
Cleaning & Care:
they can damage the finish. Dust with soft cloth.
WARNING
Serious or fatal crushing injuries can occur from a furniture tip-over
Prevent tipping accidents. Anchor your furniture.
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Tip-Over Hazard
Page 4 of 4
Advertisement
