Cylinder Head / Valve / Rocker Arm; Removal - Suzuki DF 2.5 Service Manual

CYLINDER HEAD / VALVE / ROCKER ARM

REMOVAL

1. Remove the two bolts, the intake manifold 1 and the insula-
tor 2.
2. Remove the four bolts 3 and the cylinder head cover 4.
3. Remove the valve adjusting lock nuts 5, then remove the
valve adjusting screw 6.
4. Remove the rocker arm shaft 7 and the rocker arms 8.
5. Remove the push rods 9.
6. Remove the gasket 0.
7. Remove the five bolts A and the cylinder head assembly
from the cylinder block.
POWER UNIT 6-7