Cleaning - Microtek 815C User Manual

Cleaning

W
ARNING
If you dropped any material or liquid such as water onto the monitor when
cleaning, unplug the power cable immediately and contact your dealer or
the nearest service center. Always make sure your hands are dry when
unplugging the power cable.
C
AUTION
For safety reasons, turn-off the power switch and unplug the monitor
before cleaning.
Do not scratch or rub the screen with a hard object.
Never use any of the following solvents on the LCD monitor. Such harsh
chemicals may cause damage to the cabinet and the LCD screen.
Thinner Spray-type cleaner Benzene Wax Abrasive cleaner Acid or
Alkaline solvent
Rubbing the cabinet with products made of rubber or plastic for a long
period of time may cause degeneration or loss of paint on the cabinet.
Cabinet
Remove dirt with a lightly moistened cloth and a mild solvent detergent.
Then wipe the cabinet with a soft dry cloth.
LCD
Periodic cleaning with a soft dry cloth is recommended.
Do not use tissue to clean the screen. It may damage the LCD screen.
5