Microsoft Xbox 360 Rechargeable Battery Pack User Manual page 5

INSERT YOUR BATTERY PACK
To insert your rechargeable battery pack
into your wireless controller:
Press the tab on the top of the AA
1
battery pack and pull down to detach
it from the controller.
Insert the rechargeable battery pack
2
into the battery compartment on the
controller and push in to lock.
NOTE
To avoid pinching your fingers when
inserting, push only on the flat surface of
the battery pack.
X112997301_man.indd 5
CHARGE YOUR BATTERY PACK
Charge your Xbox 360 Rechargeable
Battery Pack before first use and
whenever it's depleted. To recharge your
battery pack, you must use either the
Xbox 360 Play & Charge Kit (sold
separately) or the Xbox 360 Quick Charge
Kit (sold separately). For more
information, see the charge kit instruction
manual that came with your charger.
NOTES
• Fully charging the battery can take up
to six hours using the Xbox 360 Play
and Charge Kit, or up to two hours
using the Xbox 360 Quick Charge Kit.
• The battery may become warm during
charging or use. This is normal and does
not indicate a problem with the battery.
• If the battery is unused for a long time,
it may lose its charge. If this occurs,
simply recharge the battery normally.
5
7/28/2005 3:50:48 PM