Remote Control / Key - PEUGEOT e-2008 Handbook

Instruments

Remote control / Key

Remote control function
The remote control can be used for the following
remote functions, depending on version:
– Unlocking / Locking / Deadlocking the vehicle.
– Unlocking / Locking the boot.
– Remote operation of lighting.
– Folding / Unfolding the door mirrors.
– Activating / Deactivating the alarm.
– Locating the vehicle.
– Opening / Closing the windows.
– Activating the vehicle's electronic immobiliser.
Back-up procedures allow the vehicle to be
locked / unlocked in the event of a failure of the
remote control, the central locking, the battery,
etc. For more information on the Back-up
procedures, please refer to the corresponding
section.
Integral key
The key built into the remote control can be
used for the following operations, depending on
version:
– Unlocking/Locking/Deadlocking the vehicle.
– Activation/Deactivation of the manual child
lock.
– Activation/Deactivation of the front passenger
airbag.
– Back-up Unlocking/Locking of the doors.
– Switching on the ignition and starting/switching
► To unfold or fold the key, press the button.
With Keyless Entry and Starting
2
1
► To eject the key or put it back in place, pull
and hold the button.
Unlocking the vehicle
Selective unlocking (driver's door, boot) is
Driving/Vehicle touch
screen menu.
Complete unlocking
► Press the unlocking button.
Selective unlocking
► Press the unlocking button.
► Press it again to unlock the other doors and
the boot.
Complete or selective unlocking and alarm
sidelamps and/or daytime running lamps.
Depending on version, the door mirrors unfold.
Opening the windows
Depending on version, holding the
unlocking button pressed for more than 3
seconds opens the windows.
The windows stop when the button is released.
Selective unlocking of the boot
When selective unlocking of the boot is
activated :
► Press this button to unlock the boot.
The doors remain locked.
Depending on version, pressing and holding this
button causes the boot to open slightly.
20