To Stop The Alarm; To Use The Snooze Function; To Set Auto Off Time - Coby CSMP160 Instruction Manual

Setting the Clock

To stop the ALARM

Press ALARM1 or ALARM2 to shut off and reset the alarm.

To use the SNOOZE function

To delay the alarm for a short period of time (5 – 12
minutes), press SNOOZE. The snooze function is available
up to 10 times per alarm, after which the alarm will shut off.
For additional information on setting the SNOOZE time,
please see Setting Mode instructions above.

To set AUTO OFF time

The AUTO OFF function will turn off the device automati-
cally after a set period of time (10 – 90 minutes). To set
AUTO OFF time, switch the device on. Press and hold
[SLEEP/TIME] to enter the AUTO OFF setting mode. Press
[SLEEP/TIME] repeatedly to select AUTO OFF time. To
disable the AUTO OFF function, select '00'.
To display clock and alarm clock settings:
In STANDBY mode, press [SLEEP/TIME] to display the

CLOCK TIME. Press [ALARM1] and [ALARM2] to display
corresponding ALARM TIME.
In ON mode, Press [SLEEP/TIME] repeatedly to

display the CLOCK TIME, ALARM TIMES (1 & 2), ALARM
TYPES (1 & 2) and SNOOZE TIME.
Page 14 Coby Electronics Corporation