Removing An Oven Light Socket Assembly - KitchenAid KESC300H WH Technical Education

REMOVING AN OVEN LIGHT SOCKET ASSEMBLY

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug range or disconnect power.
2. Open the oven door and remove the racks
from inside the oven.
3. Unscrew the lens and bulb from the oven
light socket assembly and remove them.
Left Oven Light
Oven Light Lens
Right Oven Light
Oven Light Bulb
4-16
CAUTION: Be careful not to scratch or chip the
oven liner paint when you remove the oven
light socket in the next step.
4. Use a screwdriver and bend the clips on
the oven light socket away from the edges
of the liner hole, and pull the socket out of
the liner. NOTE: If it is too difficult to re-
move the socket from the front of the oven,
you will have to push the socket out from
the back of the unit.
5. Disconnect the wires from the socket ter-
minals.
(Viewed From Rear Panel)
Socket Clip
Socket
Wires