Technical Specifications; Technical Specifications Of The Cp 4163-1 - Siemens SIMATIC NET S7-4100 Operating Instructions Manual

Technical specifications

6.1

Technical specifications of the CP 4163-1

Note the information in the S7-4100 system manual /2/ (Page 49).
In addition to the information in the system manual, the following technical specifications
apply to the module.
Table 6- 1
Technical specifications
Article number
Attachment to Industrial Ethernet
Number
Design
Properties
Transmission speed
Aging time (2-port switch)
Special features of the ports X1 P1
and X1 P2
Electrical data
Power supply
via S7 backplane bus
Current consumption
From backplane bus
Active power loss
Insulation tested with
Permissible ambient conditions
Ambient temperature at -1000 ... 2000 m above sea level *
•
•
•
Relative humidity
•
Contaminant concentration
Operating altitude
Design, dimensions and weight
Module format
Degree of protection
SIMATIC CP 4163-1
Operating Instructions, 12/2022, C79000-G8976-C588-01
Technical specifications of the CP 4163-1
During operation with the rack
installed horizontally
(CP vertically)
During storage
During transportation
During operation
6DL4163-1EX00-0XE0
1
PN/IO interface with 2-port switch, 2 x RJ45 socket
100BASE-TX, IEEE 802.3-2005, Fast Ethernet, full duplex,
autocrossover, autonegotiation, galvanically isolated
100 Mbps
5 minutes
Integration in ring topology / MRP possible
15 V
Approx. 240 mA maximum
3.5 W
DC 707 V (Type Test)
• -25 °C ... +70 °C
• -40 °C ... +70 °C
• -40 °C ... +70 °C
• ≤ 95% at 25 °C, no condensation
According to ISA-S71.04 severity level G1, G2, G3
Up to 5000 m above sea level *
Compact module S7-4100, single width
IP20
6
39