Table of Contents
Advertisement
Assembly and Use of the Mini Prep Bowl
WARNING: Handle the Mini Prep Bowl Blade Assembly with care as the blades are sharp, and not locked in place.
Before emptying the contents of the Mini Prep Bowl, carefully remove the Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Mini Prep Bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Remove the lid from the Mini Prep Bowl upon completion of processing.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the Processor Bowl onto the motor base.
3
Holding the spindle by the shaft, place it onto the
gear shaft inside the Processor Bowl. Ensure that the
spindle fits around the gear shaft and that it is standing
straight. (Fig. 1)
4
Place the mini prep bowl aligning the spindle inside the
center post. (Fig. 2)
5
Hold the Mini Prep Bowl Blade Assembly by the shaft
and carefully place it over the center post of the mini
prep bowl. (Fig. 3)
6
Add ingredients into the mini prep bowl.
NOTE: Do not fill ingredients past the "MAX" fill line.
7
Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the arrow
( ) located on the lid with the arrow ( ) located on the
bowl's handle. (Fig. 4) Press the handle down until you
hear a click.
USE
Fig. 5
8
Plug the power cord into the electrical outlet and press
on the power button ( ).
9
Select the speed that best suits your needs. For best
results, hold the Auto-iQ
have reached your desired consistency. (Fig. 5)
NOTE: Please refer to "Speed Settings & Uses" chart for
suggested uses and speeds.
10 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and wait
for the Mini Prep Bowl Blade Assembly to stop turning.
11 To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. (Fig. 6)
12 Carefully hold the Mini Prep Bowl Blade Assembly by the
shaft and lift it out of the mini prep bowl. (Fig. 7)
13 Turn the bowl counter clockwise and then lift off the
base.
14 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 8)
REMOVAL
Fig. 6
Fig. 7
NutriNinja
AUTO
FROZEN DRINKS
A
BLEND
UTO
SMOOTHIES
AUTO
FOOD
ON
1500
NutriNinja
PUREE
OFF
WATTS
AUTO
FROZEN DRINKS
AUTO
HIGH
PULSE
LOW
MED
SMOOTHIES
AUTO
FOOD
ON
1500
PUREE
OFF
WATTS
HIGH
LOW
MED
Fig. 8
Pulse button down until you
™
www.ninjakitchen.com
NutriNinja
A
BLEND
UTO
NutriNinja
AUTO
PULSE
12
Advertisement
Table of Contents
