McCall ST-45-12 Specifications

McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com
Cabinet - Stainless steel top, front, door(s) and exterior
ends. All metal, welded construction. All joints and
seams closed and sealed. Enclosed rear with removable
machine compartment panel, Zinc coated steel exterior
bottom and rear with coved, sanitary aluminum interior
(S/S interior available if specified.). Salad and sandwich
unit model tops are provided with foamed-in-place, high
impact non-conducting thermobarrier, raised edge
breaker frame. Opening fitted with 1/6 size 4" deep
high-impact plastic salad pans. Openings will
accommodate 6" deep inserts (not provided). The unit
is supported by 6" minimum height adjustable legs with
non-marring feet.
Doors - Self-closing with full face S/S exterior and
aluminum inner pan standard, stainless steel optional.
Door insulated with one-shot, polyurethane and one
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
ST-45-12
CLASSIFIED TO
NSF (STD-7-1999)

SPECIFICATIONS

piece vinyl, self-adjusting magnetic gasket keyed into a
thermal-breaker retainer frame. Gaskets are removable
without tools for cleaning. All door openings have full
perimeter minimum-wattage anti-condensate heaters
behind the S/S facia to retard condensation. One piece
door pull with concealed self-closing hinge mechanism,
safety stops and stay open feature. Doors on the single
section models are reversible and can be quickly
rehinged without special tools (with additional
hardware). These are shipped from factory hinged
on the right, facing cabinet.
Insulation - Entire cabinet and door insulated with
special, extra rigid one-shot, high pressure, foamed-in-
place, closed cell polyurethane, average thickness 2".
Moveable box cover lid has 1/2" insulation.
McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
January 2007 / Printed in U.S.A.
ITEM #
MODEL #
PROJECT NAME
S
UPER
45" Wide Models ST-45-12
59" Wide Models ST-59-16

Standard Features

• "One-shot" high presure,
foamed-in-place
Polyurethane insulation
• Automatic defrost
• Matched coil and compressor
• Energy-free automatic
condensate evaporator
• No need for plumbing or floor drains
• Heavy-duty stainless steel tops,
fronts, doors and exterior ends
• 6" adjustable legs
• Full access, combination
stainless steel telescoping box cover
and utility shelf
• 4" deep salad/condiment pans
• 17" full-width removable/ reversible
synthetic cutting board
• Interior thermometer
Approval :
Interior Shelves - Two heavy-duty, adjustable,
removable epoxy coated shelves are furnished
for each door section.
Self-Contained Refrigeration - The system is a forced-
air, off cycle defrost, hermetic design with R-134a
refrigerant, capillary-metering device, and automatic,
adjustable thermostat. It is self-contained with air-
cooled, condensing unit and a high-efficiency, space-
saver diffuser with high-humidity, fin coil for extra long
life. All models are complete with a removable, energy
free automatic condensate evaporator. No floor drain or
plumbing connections required.
All units are performance tested on the production line
prior to shipping.
AIA #
SIS #
P T
REP ABLES