Panasonic TH-42PA25U-P Service Manual page 218

INPUT Equipment
1 RF
Gray Scale
Pattern
Black 2 %
Black 0 %
2 HD
Gray Scale
Pattern
Black 2 %
Black 0 %
Setting Alignment menu
Picture: PANEL W/B
Normal
White balance:
Cool
Aspect:
Chroma Control:
16:9
RGB Sub Adjust:
G Sub Bright 3) Adjust G Sub bright 1 to start some of green pixels emission
Chroma Control:
RGB Sub Adjust:
B Sub Bright 5) Adjust B Sub bright 1 to start some of blue pixels emission
Chroma Control:
RGB Sub Adjust:
R Sub Bright 7) Adjust R Sub bright 1 to start some of red pixels emission
Picture:
Normal PANEL W/B
White balance: R,G,B cut off 2) Repeat procedure 1) to 7) of Component input signal.
Cool PANEL W/B
Aspect: R,G,B Drive
16:9
** Adjust at the dark room.
R cut off 1) Set R,G and B cut off to " 80 ".
G cut off
B cut off
Gun off 2) Set Gun off to " 5 ". (Only green pixels can emit.)
at black 2% area and no emission at black 0% area.
Gun off 4) Set Gun off to " 3 ". (Only blue pixels can emit.)
at black 2% area and no emission at black 0% area.
Gun off 6) Set Gun off to " 6 ". (Only red pixels can emit.)
at black 2% area and no emission at black 0% area.
1) Change input to HD signal.
Procedure