Ford FOCUS 2014 Owner's Manual page 118

Starting and Stopping the Engine
Ignition on
Press the button once. All electrical circuits
are operational, warning lamps and
indicators illuminate.
Starting with manual transmission
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Fully depress the clutch pedal.
2. Briefly press the button.
Starting with automatic
transmission
Note: Releasing the brake pedal during
engine start may stop the engine cranking
and return to ignition on.
1. Fully depress the brake pedal.
2. Move the transmission selector lever
to position P or N.
3. Briefly press the button.
Starting a diesel engine
Note: Engine cranking may not commence
until the engine glow plug cycle has been
completed. This may take several seconds
in extremely cold conditions.
Note: Continue to press the clutch or brake
pedal until engine cranking begins.
Failure to start
The passive starting system will not
function if:
• The passive key frequencies are
jammed.
• The passive key battery is flat.
If you are unable to start your vehicle carry
out the following procedure.
Focus (CD3) , enPHI, Edition date: 01/2014
E87381
1. Carefully prise out the cover.
E85767
2. Insert the key into the key holder.
E85766
3. With the key in this position you can
press the button to switch the ignition
on and start your vehicle.
116