Configuration Menu Parameters - Honeywell TB3 Series Installation Instructions Manual

TB3 SERIES COMMUNICATING THERMOSTATS INSTALLATION INSTRUCTIONS

CONFIGURATION MENU PARAMETERS

NO NAME OF PARAMETER
P1 Hardware Version
P2 Firmware Version
P3 Setpoint High Limit
P4 Setpoint Low Limit
P5 Main Screen
P6 Key Lock
P7 Celsius or Fahrenheit
P8 Time Format
P9 Time Schedule Enable
P10 Screen Saver
P11 Screen Saver Mode Delay
P12 LCD Brightness
P13 Buzzer Stage
P14 Power Failure
31-00576-01
PARAMETER DEFINITION
Device hardware version
Device firmware version
Range: 5°C to 40 °C (41 °F to 104 °F)
Range: 5°C to 40 °C (41 °F to 104 °F)
0 = Room temperature
1 = Setpoint temperature
2 = Swap room temperature and setpoint temperature
0 = Unlocked
1 = Lock On/Off
2 = Lock mode
4 = Lock setpoint
8 = Lock fan speed
16 = Lock time settings
32 = Lock time schedule settings
63 = Locked all
NOTE:
To lock two or more buttons at the same time, add
the button values. Enter 12 to lock the setpoint (4)
and fan speed (8).
0 = Celsius
1 = Fahrenheit
0 = 24 hours clock
1 = 12 hours clock (AM/PM)
NOTE:
The system time is displayed using a 24-hour clock.
This parameter changes how the clock format will
appear on the panel or screen.
0 = Disable
1 = Enable
0 = Screen saver disabled
1 = Display On
2 = Display Off
3 = Only room temperature
4 = Room temperature and clock
5 = Swap room temperature and setpoint with clock
Range: 10 to 150 seconds
Range: 1 to 5 stage
Range: 0 to 5 stage
This parameter adjusts the device's condition to continue
when the power fails.
0 = Device starts off
1 = Device starts on
2 = Keep State Before Power Failure
12
FACTORY
DEFAULT
2.1
2.7
30 °C (86 °F)
5 °C (41 °F)
0
0
0
1
0
4
60 seconds
5
3
2