Coby  TF-TV1901 Instruction Manual

Coby TF-TV1901 Instruction Manual

19” tft lcd flatscreen television
Hide thumbs Also See for COBY TF-TV1901:

Advertisement

TF-TV1901
19" TFT LCD FLATSCREEN TELEVISION

Instruction Manual

Please read this manual carefully before operation.

Advertisement

Table of Contents
loading

Summary of Contents for Coby COBY TF-TV1901

  • Page 1: Instruction Manual

    TF-TV1901 19” TFT LCD FLATSCREEN TELEVISION Instruction Manual Please read this manual carefully before operation.
  • Page 2: Precautions

    The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.
  • Page 3: Safety.instructions

    SAFETY INSTRUCTIONS Read Instructions: All the safety and operating instructions should be read before the product is operated. Retain Instructions: The safety and operating instructions should be retained for future refer- ence. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to.
  • Page 4 SAFETY INSTRUCTIONS Outdoor Antenna Grounding: If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, ground- ing of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the...
  • Page 5 SAFETY INSTRUCTIONS Replacement Parts: When replacement parts are required, be sure that your service techni- cian has used replacement parts specified by the manufacturer or have the same charac- teristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
  • Page 6: Table Of Contents

    PRECAUTIONS..2 SAFETY.INSTRUCTIONS..3 TABLE.OF.CONTENTS..6 PACKAGE.CONTENTS... 7 LOCATION.OF.CONTROLS... 8 Front View ...8 Right Panel View ...8 Rear Panel View ...8 Remote Control ...9 GETTING.STARTED... 10 Cable Connections ...10 Remote Control ...11 Power Management ...11 TV.FUNCTION.
  • Page 7: Package.contents

    PACKAGE CONTENTS Please make sure the following items are included with your LCD TV/monitor. If any items are missing, contact your local dealer. TF-TV1901 Remote Control AV Cable AC Power Cord...
  • Page 8: Location.of.controls

    LOCATION OF CONTROLS Front View TFT LCD Display Stereo Speakers Remote Sensor Power Indicator Right Panel View Volume Up Button Volume Down Button Channel Up Button Channel Down Button Menu Button Mode/Enter Button Power Button Rear Panel View Power In Jack Component Video Input Jacks S-Video Input Jack Composite Video Input Jacks...
  • Page 9: Remote Control

    LOCATION OF CONTROLS Remote Control Power Turn the TV On/Off Set the TV AUDIO mode Volume Up/Down Adjust the Volume level Menu Access the Setup Menu Picture Change the Picture preset mode (Normal, User, Soft, Bright) Mute Turn the Volume On/Off Numeric Keypad Enter numeric input data.
  • Page 10: Getting.started

    Cable Connections Do not connect the power until the first 3 connections have been made. Connect TV RF sources to the coaxial TV antenna jack. TV RF sources may include: Over- the-Air receiving antennas or cable lines. You can use a 75 ohm coaxial cable to connect an outdoor antenna.
  • Page 11: Remote Control

    GETTING STARTED Remote Control • Refer to the diagram. Remove the battery com- partment cover located on the rear of the remote control. Insert 2 x “AAA” batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment.
  • Page 12: Tv.function

    Basic Operation Prepare the antenna and power connections (see the Getting Started section for details). Press POWER to turn the TV on. Press MODE to set the TV to “TV MODE”. You should see the antenna signal on-screen. Press CH+/CH- to change the channel. TV Setup Menu The TV setup menu contains the following items: Picture, Sound, Channel, Display, and Parental Controls setup.
  • Page 13: Picture Setup

    Picture Setup Item Picture Mode Brightness Contrast Color Tint Sharpness Sound Setup Item Bass Treble Balance TV FUNCTION Description Set the Picture Mode preset (Normal, User, Bright, Soft) Set the brightness of the display screen. Set the contrast of the display screen. Set the color of the display screen.
  • Page 14: Channel Setup

    Channel Setup Item Auto Searching Source Channel Skip Fine Tuning AFC Off Display Setup Item Language Transparency Factory Reset Captions TV FUNCTION Description Select to search and store all available broadcast channels. Select antenna system (Air/Cable) Select On/Off to skip unwanted channels Select to fine-tune a channel Select AFC On/Off Description...
  • Page 15: Parental Control Setup

    Parental Control Setup The Parental Control menu is password-protected. When the Parental Control menu is selected: Press OK Use the Numeric keypad to enter a 4-digit code (default password is: 1111) and press then press OK. If the password is correct, the menu below will appear. Item Parental Lock Clear All...
  • Page 16: Tv Rating

    TV Rating TV broadcasts include a signal that classifies the con- tents of the program. When the TV Rating control is set, TV broadcasts that have been cliassified with a higher rating will be blocked. • None: no restrictions (lowest rating) •...
  • Page 17: Av.function

    Basic Operation Prepare the AV Input and power connections (see the Getting Started section for details). Press POWER to turn the TV on. Press MODE to set the TV to the mode that corresponds with the Video Input jack that is in use (i.e., Video, S-Video, or Component Video (Y-Cb/Pb-Cr/Pr).
  • Page 18: Image Position (Y-Cb/Pb-Cr/Pr Mode Only)

    Image Position (Y-Cb/Pb-Cr/Pr Mode Only) Item Image Position Please refer to the TV FUNCTION section for more setup option details. AV FUNCTION Description Adjust the horizontal and vertical position of the image from +10 to -10...
  • Page 19: Troubleshooting

    TROUBLESHOOTING If you have a problem with this TV, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. COBY Electronics Technical Support 56-65 Rust Street Maspeth, NY 11378...
  • Page 20 The unit has malfunctioned. • Unplug the TV and let it rest for 30 minutes. Plug it back in, the restore function should reset the TV. TROUBLESHOOTING...
  • Page 21: Specifications

    SPECIFICATIONS Display Type Display Resolution Display Pixel Pitch Display Contrast Display Brightness TV System TV Tuning system Power Supply Power Consumption Video Input Audio Input Operating Temperature Unit Dimensions Weight 19” TFT LCD 1280 x 1024 0.264mm 500:1 250 cd/m NTSC-M FS with PLL VHF-L: 55.25MHZ ~ 83.25 MHZ...
  • Page 22 NOTES...
  • Page 23 NOTES...
  • Page 24 COBY Electronics Corp. 56-65.Rust.Street. Maspeth,.NY.11378 www.cobyusa.com. www.ecoby.com...

Table of Contents