Trane KIT 16724 Installer's Manual

ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
MPORTANT — This Document is customer property and is to remain with this unit. Please return to service information pack upon completion of work.
I
WARNING:
!
L
This information is intended for use by individuals pos-
sessing adequate backgrounds of electrical and me-
chanical experience. Any attempt to repair a central air
conditioning product may result in personal injury and/or
property damage. The manufacture or seller cannot be
responsible for the interpretation of this information, nor
can it assume any liability in connection with its use.
Scope:
This additional EMI (Electromagnetic Interference) pro-
tection kit is developed to reduce the potential effects
of EMI on the pressure transducers.
Application:
This Kit is to be used on the following outdoor
condensing units that have an EEV flow control device:
• 4TWR6024–060A1
• 4TWX6024–60E1/G1
• 4A6H6024–60E1/G1
• 4A6H7024–060A1000AA
• 4TWR7024–060A1000AA
• 4TWX8024–060A1000AA
The manufacturer has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice. Representative-only illustrations included in this document.
© 2014 Trane U.S. Inc. 02/14
HAZARDOUS VOLTAGE - DISCONNECT POWER and DISCHARGE
WARNING
Installer's Guide
Pressure Transducer
EMI Protection Kit
KIT 16724
CAPACITORS BEFORE SERVICING
LIVE ELECTRICAL COMPONENTS!
During installation, testing, servicing, and troubleshoot-
ing of this product, it may be necessary to work with
live electrical components. Failure to follow all electrical
safety precautions when exposed to live electrical com-
ponents could result in death or serious injury.
Overview:
This Kit is to be used on the specific outdoor condens-
ing units (shown at left) that have an EEV flow control
device. This Kit provides an additional EMI grounding
path, to help reduce the potential interference dam-
age that can be caused to the outdoor units' pressure
transducer. Install this kit when replacing a pressure
transducer on the product listed in the heading of these
installation instructions.
18-HH28D1-3
WARNING
!
L
18-HH28D1-3