Audio Connections; 2-Channel Stereo - Coby DVD-53 Instruction Manual

Audio Connections

Use one of the following connections only to avoid signal interference:
1. 2-Channel Stereo Audio Out
2. 5.1-Channel Surround Audio Out (requires a surround sound amplifier)
3. Coaxial Digital Audio Out (requires a digital decoding amplifier)
4. Optical Digital Audio Out (requires a digital decoding amplifier)

2-Channel Stereo

The DVD player is equipped with 2-channel RCA Stereo Audio outputs located
on the rear panel (L, R). Connect the player's audio outputs to a stereo TV (or
optionally, a stereo amplifier).
To L/R Audio Input of Stereo TV
2-Channel Audio
To L/R Audio Input of Stereo Amplifier (optional)
If a stereo amplifier is used, it should be set to the output mode that
corresponds to the DVD player. Refer to the amplifier's user guide for
help.
Page 1 Page 1
CONNECTIONS
Component, Composite, or
S-Video Connection
TV with AV Input
2-Channel
Stereo Amplifier
Coby Electronics Corporation Coby Electronics Corporation