Off; [ Eco Operation Indicator Lamp ] /Door Alarm/Locking The Control Panel - Hitachi R-C6800S How To Use Manual

[ eco OPERATION INDICATOR LAMP ] /DOOR ALARM/LOCKING THE CONTROL PANEL

● Always confi gure the settings with all the doors closed.
Caution
When the refrigerator is operated in a manner to reduce power consumption, such as Frost Recycle Cooling,
the indicator lamp is automatically lit to indicate that the refrigerator is operating in the energy saving mode.
Notice
● If [ " eco " Operation indicator lamp] isn ' t illuminated, check the following things.
・ Is the [ " eco " Operation indicator lamp] set as Off? → Perform the above-mentioned procedure for how to return.
・ Immediately after installation, when a lot of food is stored at a time, or when you open or close a door frequently, the compressor operates
at a high speed and this indicator lamp is not lit. → Open/close the door quickly or minimize the number of opening/closing the door.
・ When the refrigerator is operated with FRE EZER , REF RIGERATOR or QUIC K enabled, → It will be illuminated after
the quick cooling functions fi nish and the operation of the refrigerator gets stable.
・ In the VEGETABLE mode → Stop the VEGETABLE mode.
・ In summer, for example, when the ambient temperature around the refrigerator is high.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the setting
where the [ " eco " Operation indicator lamp] is illuminated.
[ " eco " operation indicator lamp] can be turned off when you feel uneasy at night, etc.
■ How to turn off the
indicator lamp
Touch and hold the
button for three seconds with
all the doors closed until the
[ " eco " Operation indicator
lamp] blinks.
The [ " eco " Operation
indicator lamp] is unlit.
When a door remains open for 30 seconds or more, alarm sounds as shown below and characters on the Control Panel are blinking to indicate that the door is open with sound and light.
Duration when door is open
30 seconds
1 minute
2 minutes
3 minutes
■ You can set the sound level of the alarm louder or no alarm sound.
1. Touch and hold the
alarm gets louder).
2. Touch and hold the
sounds (The alarm stops beeping).
When releasing the setting, perform the same operation with the alarm off. Two beeps sound, and then the setting is released.
Notice
● When the Door Alarm is disabled, characters on the Control Panel no longer blink and operation sound is no longer made, but alarm
indicating cleaning of the ice-making tray does sound.
● The Door Alarm is enabled as factory setting.
● When connecting/disconnecting the power plug or after recovering from electric power failure, it will return to the standard setting
where the Door Alarm sounds.
When this indicator lamp
activated by touching it. This can prevent erroneous operation of the Control Panel or misuse by children.
■ Locking
Touch and hold the
button for approximately
three seconds with all
the doors closed until
one beep sound.
is lit to indicate
that the lock has been
completed.
Notice
● Electric pulling-out operation will not be disabled even if the Lock function on the panel for operation is set as On.
To disable the Auto Door function, unlock the Control Panel and then press and hold the
58
or more until two beeps sound.
● When connecting/disconnecting the power plug or after recovering from electric power failure, lock of the panel for operation may be released.
[ " eco " Operation indicator lamp]
The indicator
lamp blinks
3 seconds
Touch this button and hold it for 3 seconds
Alarm sound
3 long beeps
3 long beeps
5 long beeps
It keeps continuously sounding.
When adjusting the volume of the door alarm
button for three seconds with all the doors closed until two beeps sound (sound level of the
button for approximately three seconds with the sound level of the alarm until one beep
Standard Higher sound level of a door alarm
Locking the Control Panel
(Lock on the panel for operation) is illuminated, any button other than Energy Saving will not be
Indicator
lamp is ON
3 seconds
Touch this button and hold it for 3 seconds
Pg.48
Pg.38
[ eco Operation indicator lamp]
Pg.50
■ How to restore the setting
Touch and hold the
for three seconds with all the doors
About
closed until the [ " eco " Operation
indicator lamp] becomes lit.
The [ " eco " Operation indicator lamp]
is lit for three seconds.
After that, the lamp is lit or unlit,
depending on the operation conditions.
Door Alarm
※ From 30 seconds onwards, the Door Alarm sounds
Control Panel
only when the energy saving mode is set.
Does not blink
The Refrigerator Compartment, Ice Compartment,
Flashing
Lower Freezer and Vegetable Compartment have the
Flashing
Door Alarm function (, but the Upper Freezer doesn t).
Flashing
■ Unlocking
Touch and hold the
button for approximately
three seconds with all
About the doors closed until
two beeps sound.
is lit to indicate
that the lock has been
released.
Indicator
lamp is ON
button
Touch this button and hold it for 3 seconds
Door alarm off
Indicator
lamp is OFF
Touch this button and hold it for 3 seconds
button for three seconds
About
3 seconds
About
3 seconds