Table of Contents
Advertisement
Editing Patterns (Pattern Editing Screen)
Display
No.
Key Name
2
Touch this key to change the
configuration of a character pattern.
Array key
When selecting an arc (
), use
degree of the arc.
: Make the arc flatter.
: Make the arc rounder.
When selecting
change to
increase or decrease the incline.
Touch
patterns to its original appearance.
3
Touch this key to change the font of the
selected characters.
Font key
Depending on the font that was selected,
it may not be possible to change the
font.
4
Touch this key to switch between text
written vertically and horizontally.
Vertical/horizontal
(Japanese font only)
text key
5
Touch this key to edit each character
separately.
Edit character key
When touching
character by using
the size.
When touching
character by using
the font.
6
Touch this key to split text between
characters so that they can be edited
Split text key
separately.
Use
pattern is to be separated, and then
touch
Any pattern that is split cannot be
recombined.
40
Explanation
and
to change the
,
and
and
. You can
to return the character
, select the
to change
, select the
to change
to select where the
to separate it.
Display
No.
Key Name
7
Touch this key to change the spacing of
character patterns.
Character spacing
key
Touch
the character spacing.
Touch
original appearance.
8
When a combined pattern is selected,
use this key to select a part of the pattern
Select key
to edit. The selected pattern is outlined
by the red box. If the line feed key was
used while entering text, single lines can
be selected.
Explanation
/
to increase or decrease
to return the pattern to its
Advertisement
Table of Contents
