Layout Adjustment > Edge Erase; Layout Adjustment > Image Shift - Xerox 770 User Manual

Layout Adjustment > Edge Erase
This option allows you to erase images around the border of a document. Edge Erase
also deletes center streaks caused by a gap between the spine of a bound document
and the document glass. Options include:
All Edges
This option causes a preset amount to be erased from the top/bottom and left/right
edges and from the center of the output image.
Individual Edges
This option allows you to independently set the amount to be erased for each of the
four edges and the center of your output. The default is 0.1in. and each edge can be
adjusted in 0.1in. increments up to 2.0in.
Parallel Edges
This option allows you to specify an EQUAL amount to be erased from each of the top,
bottom, left, and right edges and the center of your output.
Layout Adjustment > Image Shift
Image Shift allows you to move the position of the image on the output page. Options
include:
No Shift
This is the default setting. The image on the copy will be in the same place as the image
on the original.
Auto Center
This option automatically centers the scanned image on the output paper. To work
effectively, the original should be smaller than the selected output stock or the image
should be reduced.
Corner Shift
This option enables you to move the image to each of the four corners of the paper or
to the center of each of the four sides of the paper (eight positions total).
Margin Shift
This option creates a margin for binding one edge of a document by shifting the image
away from that edge.The Margin Shift option enables you to center a document image,
shift the image to one edge slightly, or move the image to a specified edge (0-2.0
in./0-50.8 mm Left/Right or Top/Bottom) of the output.
®
Xerox 770 Digital Color Press
User Guide
Copy
5-11