Entertainment Systems; Radio Controls; Digital Signal Processing (Dsp) - Cadillac STS 2005 Customer Convenience/Personalization Manual

Entertainment Systems

A-B
D

RADIO CONTROLS

PWR (Power): Press this knob (A) to
turn the system on or off.
VOL (Volume): Turn this knob (B) to
increase or decrease volume.
AVC (Automatic Volume
Compensation. Requires Bose
System) This feature automatically
adjusts audio volume based on
ambient noise levels to ensure
optimal listening quality. See Section
3 of your Owner Manual for
complete operating instructions.
BAND: Press this button (C) to select
FM1, FM2, AM, or XM1 or XM2 (if
equipped).
Refer to Owner Manual for further information.
Driver Entertainment
Information Systems
SOURCE: Press this button (D) to
select the radio or CD.
: Press this button (E) to scan to
the next station. The station will play
for five seconds and then advance to
the next station. Press this button
again to stop scanning. To scan
preset stations, press and hold this
button for two seconds until a beep
sounds and PSCAN appears on the
display. Press the button again to
stop scanning the presets.
: Press the right or left single
arrow buttons (F) to go to the next or
previous station and remain there.
LOCAL/DISTANT Selection: This
® Audio
feature allows you to search for local
or distant radio stations. See Section
3 of your Owner Manual for
operating instructions.

DIGITAL SIGNAL PROCESSING (DSP)

If equipped with the optional Bose
Audio System, the DSP provides a
choice of five listening experiences:
DSP NORMAL: This setting provides
the best overall audio performance
for all passengers.
Convenience
Features
TALK: This setting makes the spoken
word sound clearer and is
recommended when listening to
non-musical programs, such as talk
shows, news, sports broadcasts and
books on tape.
SPACIOUS: This setting makes the
listening space seem larger.
REAR SEAT: This setting provides
rear passengers with the best
possible sound quality.
DRIVER SEAT: This setting gives front
passengers the best possible sound
quality.
The DSP can be used with the radio
or the CD player. To select a DSP
option:
• Press the TUNE/SELECT knob; then
turn the knob until one of the
above five settings appears on the
display.
• Press TUNE/SELECT to select a
®
DSP setting.
• Press CLR to exit the display.
Continue pressing CLR to return to
your original display.
Reviewed with Customer (Please Check Box)
Vehicle Maintenance
Personalization
Owner
Privileges