Specifications - Makita BHP442 Instruction Manual

ENGLISH

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
For Model BHP442
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
The vibration total
determined according to EN60745-2-1:
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
Low (1)
Overall length
Net weight
Rated voltage
equipment
environmentally
) : 79 dB(A)
pA
value (tri-axial vector
6 mm x 75 mm
1.7 kg (BL1430)
END001-1
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into metal
Vibration emission (a
For Model BHP452
For European countries only
Noise
and its
The typical A-weighted noise level determined according
to 60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
compatible
Vibration
ENE039-1
The vibration
determined according to EN60745-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG101-1
Work mode : drilling into metal
Vibration emission (a
EC-DECLARATION OF CONFORMITY
Model; BHP442,BHP452
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
ENG203-1
EN60745,
Directives, 2004/108/EC, 98/37/EC.
sum)
2
BHP442
13 mm
13 mm
38 mm
M6
0 - 1,400
0 - 400
0 - 21,000
0 - 6,000
215 mm
D.C. 14.4 V
) : 6.5 m/s
h,ID
2
) : 2.5 m/s
h,D
pA
Wear ear protection.
total value
) : 6.5 m/s
h,ID
2
) : 2.5 m/s
h,D
EN55014 in accordance
CE2006
BHP452
10 mm x 89 mm
M6
0 - 1,500
0 - 400
0 - 22,500
0 - 6,000
215 mm
1.8 kg (BL1830)
D.C. 18 V
2
ENG302-1
2
or less
ENG101-1
) : 79 dB(A)
ENG203-1
(tri-axial vector sum)
2
ENG302-1
2
or less
ENH102-6
with Council