Table of Contents
Advertisement
Connecting Power
The CX-R60 operates on DC 3V power (2 x "AA" batteries).
Loading Batteries
1.
Open the Battery Compartment Door.
2.
Insert 2 x "AA" batteries, taking care to match the "+" and "–" polar ends
of the batteries with the markings inside the compartment.
3.
Close the Battery Compartment Door.
Please note that the cover is hinged; do not attempt to remove
the cover.
Alkaline-type batteries are recommended.
Remove the batteries from the recorder if it will be unused for
more than 30 days.
AC Adapter (Optional)
The CX-R60 may be powered by an AC adapter with DC 3V output through
the Power In jack located on the bottom of the recorder.
Connecting an External Microphone (Optional)
The CX-R60 is equipped with both an integrated microphone and a micro-
phone input jack that can be used to connect an external microphone.
The MIC In jack will accept microphones with a 3.5mm connector plug.
If an external microphone is connected to the MIC In jack, the integrated
microphone will be disabled.
Page 10
GETTING STARTED
Coby Electronics Corporation
Advertisement
Table of Contents
