Page 2
NAMRON ZIGBEE FOH BRYTER BATTERI 70100041 Important: Read All Instructions Prior to Installation Function introduction C OM (wire color: bla ck) K 1 ( wire color: red) K 2 ( wire color: blue) K 3 ( wire color: green) K 4 ( wire color: white)
Product Data Switch Type Friends of Hue Switch 10-30m (typical) Transmission Range 2.4GHz Radio Frequency 3V(1xCR2430 battery) Power Supply Buttons 40x40x11.2mm Dimensions -20 ℃ ~ + 45℃ Operating Temperature Working Humidity 10% ~ 95% RH non-condensing Waterproof Grade IP20 Warranty 5 years Product Description The Zigbee push-button coupler is a 4-channel push-button interface for simple wall/flush type box installation.
Page 4
Operations 1. Configure your Hue Bridge correctly and add light devices to the Hue Bridge through Hue App as instructed. 2. Add the Coupler to Hue Bridge Method 1: is method is applicable for the situation that all 4 push buttons are connected. Step 1 : tap "...
Page 5
Method 2: is method is applicable for all situations regardless of how many push buttons connected. Step 1 : tap " Accessory setup" on " Settings" page, then tap " Add accessory", then tap " Friends of Hue switch" . Step 2: Tap a brand to select it, any brand will work.
Page 6
2. Select designated room/rooms to control Step 1 : Tap to select a room to be controlled by left side on the switch, then right side. 3. Configure the Switch through Hue App Step 1 : once added successfully, you can use the system suggested setting or configure the switch as per your preferences.
Page 7
4. Control the Light Devices in the Selected Room/Rooms with the Switch After configured successfully , tap “save” at upper right corner to save the settings. Then you can use the switch to control the light devices in the selected room/rooms . The key part of this controller is a universal, extremely rotary standard switch element that can be integrated in numerous frames by different manufactures as below list: BERKER...