Summary of Contents for Pentair SB-PF-GTW-001
- Page 1 GATEWAY INSTALLATION AND USER MANUAL Pentair Home App SB-PF-GTW-001 IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS SB-CU-IMP-070A...
- Page 2 Pentair. Those names and brands may be the trademarks or the registered trademarks of these parties,...
- Page 3 IMPORTANT SAFETY GUIDELINES, READ AND FOLLOW ALL OF THE INSTRUCTIONS, KEEP THESE INSTRUCTIONS GENERAL POINTS - DANGER - INSTALLERS, POOL SPECIALISTS AND OWNERS MUST CAREFULLY READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. - WARNING - Most countries regulate the construction, installation and operation of public swimming pools and spas, and the construction of residential pools and spas.
- Page 4 Avenue de Sévelin 20 Apr-2021 1A / IP20 - 868,3 MHz CH-1004 Lausanne General function of the device. The Gateway makes it possible to connect your Gateway’ s compatible devices to your Pentair App account via your WiFi home router. WIFI Connexion Pairing...
- Page 5 App server is automatic. By following the instructions, after creating your Pentair account within the Pentair Home App, you will be able to connect to your installation in a few minutes. The controls sent via the App are effective in a few seconds.
- Page 6 Micro cut-off 2 sec spaced = WiFi OK, but no connection to the server The WiFi connection to the home router is working. The connection to the Pentair server has not been set up. - Make sure your device is ON and connected to internet.
- Page 7 #1: Make sure : - you have downloaded the Pentair Home App and created your account. - you have downloaded the Pentair Home App and have created your account. #2: Place your Gateway within range of your WiFi home router.
- Page 8 Provisioning your Gateway to your Wi-Fi home router (2/3) #5: Make sure your phone’ s Bluetooth® connection is on. Your Gateway will be discoverable as «PNRXXSGWXXXXXXXXX». Select it. #6: Continue the flow of menus by selecting your WiFi network and populate the credentials asked and continue untill getting «Connected».
- Page 9 = Server connected From now on, the data from Gateway’ s compatible devices is recorded regularly on the cloud. Pairing the Gateway to a device (compatible, Pentair range). #1: Make sure your Gateway is properly power supplied. #2: Give a short push (< 0.3 sec) on the pairing button. The green and red LEDs should be flashing alternatively and quickly.
- Page 10 Copyright – Limited Licence: except as specifically permitted herein, no portion of the content of this document may be reproduced in any form or by any means without the prior written permission of Pentair International SRL. © 2022 Pentair. All rights reserved.