Mackie 1402-VLZ Pro Specifications page 6

soloed channel(s). The meters shall be calibrated so
that a 0dBu signal at the Control Room output shall
be indicated as 0dB on the meters, ±1 LED.
7. PHYSICAL CONFIGURATION. The mixer shall be
made of steel, painted dark gray with light gray graph-
ics. The mixer's dimensions shall be 2.9" (74mm) in
height, 14.0" (356mm) in width and 13.0" (330mm) in
depth, as viewed horizontally. The mixer shall weigh
9 lbs, 8 oz (4.5 kg). Optional RM1402-VLZ rack-mount
brackets shall allow the mixer to be mounted in a rack
system, with either the chassis top or the control knobs'
tops to be fl ush with the rack rail.
8. SPECIFICATIONS. In addition to specifi cations
already cited, the mixer shall meet or exceed the fol-
lowing specifi cations: Frequency response: microphone
input to any output, 20Hz to 60kHz, +0dB/–1dB; Total
Harmonic Distortion (THD): any input to any output,
1kHz @ +14dBu, 0.0007%; Equivalent Input Noise
(EIN): microphone input to insert send, –129.5dBu;
Common Mode Rejection (CMR): microphone input to
insert send, maximum gain, 1kHz, better than 90dB;
Typical Main Output noise: all channels assigned, chan-
nels 1, 3 and 5 panned left, channels 2, 4 and 6
panned right, –86.5dBu; Signal to Noise ratio: ref
+4dBu operating level, 90dB; Attenuation: ref. 0dB @
1kHz, Main Mix level control down, –85dBu; Channel
Mute engaged, –84dBu; Channel Gain control down,
–83dBu; Input impedance: microphone inputs, 1.3 kΩ;
Channel Insert return, 2.5 kΩ; All other inputs, greater
than 10 kΩ; Output impedance: Tape Out, 1.1 kΩ; All
other outputs, 120Ω.
The mixer shall be a Mackie 1402-VLZ PRO.
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
800.898.3211, fax 425.487.4337, sales@mackie.com
UK +44.1268.570.808, fax +44.1268.570.809, uk@mackie.com
FILES FOR DOWNLOADING
1402VLZP.PDF this specifi cation sheet
1402AE.TXT text version of Architect's and
Engineer's Specifi cations for insertion into proposals
LOUD Technologies continually engages in research related to product improvement. New material,
production methods, and design refi nements are introduced into existing products without notice
as a routine expression of that philosophy. For this reason, any current LOUD Technologies product
may differ in some respect from its published description, but will always equal or exceed the
original design specifi cations unless otherwise stated. ©1999-2004 LOUD Technologies Inc. All
rights reserved.
Part No. 091-295-00 Rev. B